 |
- Artillery Studio Artillery Studio is an advanced, feature-packed slicing software. |
Please download from our official website: https://artillery3d.com
¶ Artillery Studio
¶ Quick Start
- Software Download and Installation
- Software Installation
- Software Interface
- Adding, Importing, and Managing Devices
- First Print
- Software, Firmware Updates and Notifications
¶ Print Settings
- Calibration Guide
¶ Release Notes
¶ V1.0.9
Bug Fixes
- Fixed the “Auxiliary Light” control in the slicer software.
- Disabled the dark mode in the slicer software.
- Fixed device name issue when using multiple devices with different names.
- Fixed the issue where downloading G-code files from the device print page to the computer failed.
- Fixed preview image display in print progress.
- Fixed missing preview images for SD card files.
- Fixed occasional crash when refreshing the “Device” → “Print” internal storage page.
- Fixed missing confirmation button for pause and stop printing.
- Fixed pop-up “Homing” window bug when moving axis in machine control.
- Fixed incomplete display of “%” symbol in print progress.
¶ Previous releases
¶ End Notes
We hope the detailed guide provided has been helpful and informative.
If this guide does not solve your problem, please contact us via email at support@artillery3d.com and we will answer your questions and provide assistance.
If you have any suggestions or feedback on this Wiki, please leave a message in the comment area. Thank you for your support and attention!