¶ Fixed known issues and improved M1pro stability.
- Click "Feed" to automatically execute the feeding process. After the process is completed, a "Feeding Completed" popup window will appear. Please note that pushing consumables requires manually feeding the consumables into the extruder.
-en_belindoc-0.png) |
-en_belindoc-1.png) |
-en_belindoc-2.png) |
- Return Material: Click "Return Material" to automatically execute the material return process. After the process is completed, a "Return Material Completed" pop-up window will appear, and then the consumables need to be manually withdrawn.
-en_belindoc-3.png) |
-en_belindoc-4.png) |
-en_belindoc-5.png) |
Note: Stop:Click during the feeding/returning process to immediately stop the current consumables conveying action.
¶ Optimized the filament runout recovery function:
- Filament runout detection triggered → UI pop-up window interface
-en_belindoc-6.png) |
- Click "Continue" → Enter the consumables feeding/returning interface. The operation process is the same as the "Consumables" column (you need to click "Feed" first, and then push the consumables, and the order is strictly prohibited from being reversed).
|
|
- After completing the replacement of consumables,return to the printing interface and click the " ICON-1"icon to continue printing
-en_belindoc-7.jpg)
|
-en_belindoc-8.png) |
¶ Optimized the manual pause function
- When paused, you can click the " ICON-2" icon to feed/return material (the process is the same as the "Filament Runout Recovery Function"); it cannot be operated during printing.
-en_belindoc-9.jpg)
|
-en_belindoc-10.png) |
- After completing the replacement of materials or other operations, you can click the “ICON-1 ” icon to continue printing.
|
|
|
|