¶ Installation and use of tools：H2.0 Hexagonal Wrench.
¶ Installation process:
- The shovel knife model is printed. The shovel knife handle is loaded into the blade and the shovel knife blade cover is put on. As shown:
 |
 |
 |
- Install M3X6 screws in the two holes of the blade cover, turn over the back of the shank and install M3 nut, use H2.0 hexagonal wrench to lock the screws - complete the installation.
3D Printer Spade Knife Usage:
① Convenient to have PEI board to disassemble the print model and clean the model surface support.
② Convenient to assist in dismantling the damaged soft magnetic paste on the heat bed.
③ Used to clean up the dirt on the working surface.
After completing the cleaning task, the spatula is inserted back into the knife holder to keep the 3D printing worktable tidy. As shown in the picture:
 |
 |
 |
 |